Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of Sintering Temperature on the Corrosion and Wear Behavior of Protective SiO2-Based Sol-Gel Coatings

Sol-gel hybrid organic-inorganic and inorganic SiO₂-based protective coatings with and without added 3 m glass particles were developed and tested for their corrosion and wear behavior of an stainless steel substrate (AISI316L). The corrosion resistance greatly increases by incorporating glass particles in the sols. The incorporation of particles in the coatings allows the synthesis of thicker crack-free coatings. On the other hand, the corrosion resistance increases for coatings with a higher organic content obtained at lower sintering temperature. These coatings are also highly stable in saline aqueous solutions. However, the wear resistance is badly affected by the hybrid character of the SiO₂ matrix. The optimum coating process in terms of corrosion and wear resistance, appears to be a hybrid system with a dense SiO₂ network achieved at intermediate sintering temperatures.     

Optimization of the electrophoretic deposition of YBa2Cu3O7−x superconducting large area coatings

Large area coatings (>10cm²) of the high temperature superconductor YBa₂Cu₃O_7–x (x = 0.1 – 0.2) (YBCO) have been prepared by scale up an electrophoretic deposition technique using silver sheets and Si-wafers coated with Ag or Au as substrates. Several parameters, like the kind of the solvent, the applied voltage, the distance between the electrodes, the initial concentration of the suspension and the temperature during the electrophoresis were investigated in order to attain high deposition rates, as well as uniform YBCO coatings with the proper stoichiometry. To obtain a strongly adherent and dense coating a subsequent appropriate sintering and annealing procedure has been developed. The coatings obtained were characterized for their stoichiometry and superconducting properties by X-ray diffraction (XRD), Raman spectroscopy and magnetic measurements. The homogeneity and thickness of the films and the average grain size of the deposited particles have been investigated by optical and scanning electron microscopy (SEM).     

Preparation of VPS and PVD coatings for metallographic and TEM investigations

The aim of the first part of the paper is to give some advice for the faultless metallographic preparation of vacuum plasma sprayed coatings. Several coating/substrate combinations using metals, alloys and ceramics were investigated to derive some general rules. The second part deals with a preparation technique for cross-sections- of physical vapour deposition coatings. This technique was optimized for TiN and Ti(C, N) coatings on hardmetals which were examined in an analytical transmission electron microscope.     

聚合物涂层在毛细管电泳分离蛋白中的研究进展

毛细管电泳具有分析时间短,分离效率高,样品消耗量少等优点,在生物样品分离,特别是蛋白质分析领域有重要应用。然而,毛细管内壁硅羟基的解离给分离结果带来诸多不良影响。聚合物涂层能够抑制蛋白质在毛细管内壁的吸附以及调控电渗流,故对毛细管内壁进行有效修饰能够提高其对蛋白质的分离效率及分离稳定性。该文主要综述了动态及静态聚合物涂层毛细管的最新研究进展,并概述了近些年基于多巴胺/聚多巴胺发展起来的涂层毛细管的研究进展,最后展望了聚合物涂层毛细管的发展趋势。     

Investigation of Glass-Like Sol-Gel Coatings for Corrosion Protection of Stainless Steel Against Liquid and Gaseous Attack

Glass-like sol-gel coatings have been investigated as corrosion protective coatings on stainless steel. Magnesium- and borosilicate coatings with thickness of about 100–700 nm and methyl-modified SiO2 coatings with a thickness of about 2 m were deposited on stainless steel plates by dip-coating. The coatings were densified between 400°C and 500°C in different atmospheres (N2, air) for 1 h. The corrosion protection against gaseous attack was investigated by accelerated corrosion tests, at 800°C in air for 1 h. A corrosion protection factor was calculated from the relation Fe/Fe2O3, determined by XRD on the surface of coated and uncoated samples. Methyl-modified SiO2 coatings showed a protection factor, which was 2 orders of magnitude higher than for the other coatings. Electrochemical investigations were performed on samples submerged in a NaCl solution for 200 h. The corrosion propagation, polarization resistance and impedance vector were measured. For accelerated corrosion tests, polarization intensity curves were determined for high potentials of up to 1 V. Again excellent results were obtained for the methyl-modified SiO2 coatings, which remained passive for 200 h. Results of the salt spray corrosion test, however, showed no corrosion protection by the sol-gel coatings. After 2000 h in the salt spray chamber the steel was corroded and the coatings peeled off. It is concluded that for the further development of these coatings an improved interfacial passivation will be required.     

Sol–Gel SiO2-ZrO2 Coatings for Optical Applications

SiO₂-ZrO₂ based nanostructured multilayers films have been prepared by sol–gel processing from metallorganic precursors by low temperature inorganic polymerization reactions. Simultaneous gelation of both precursors was realized. Homogeneous and transparent films were obtained at room temperature by dip- and spin-coating on glass and silicon wafer substrates. Samples with successively deposited layers (1–3 layers) and successive thermal treatments have been also studied. Each deposited layer was thermally treated for 1 h at 300°C. The coatings were characterized by XRD, spectroellipsometry (SE), UV-VIS spectroscopy and AFM methods. The influence of substrates, number of coatings and number of thermal treatments on the optical and structural properties of the films was established. The thickness of three deposited SiO₂-ZrO₂ layers is about 496 nm on glass substrates and 413 nm on the silicon wafer substrate. The films deposited on glass are more porous than those deposited on silicon. The properties of optical waveguide prepared from SiO₂-ZrO₂ layers on silicon substrates will be discussed.     

Application of dodecyldimethyl (2-hydroxy-3-sulfopropyl) ammonium in wall modification for capillary electrophoresis separation of proteins

A zwitterionic surfactant, dodecyldimethyl (2-hydroxy-3-sulfopropyl) ammonium (C12H25N+(CH3)2CH2CHOHCH2SO3-), named dodecyl sulfobetaine (DSB), was used as a novel modifier to coat dynamically capillary walls for capillary electrophoresis separation of basic proteins. The DSB coating suppressed the electroosmotic flow (EOF) in the pH range of 3-12. At high DSB concentration, the EOF was suppressed by more than 8.8 times. The DSB coating also prevented successfully the adsorption of cationic proteins on the capillary wall. Anions, such as Cl-, Br-, I-, SO4(2-), CO3(2-), and ClO4-, could be used as running buffer modifiers to adjust the EOF for better separation of analytes. Using this dynamically coated capillary, a mixture of eight inorganic anions achieved complete separation within 4.2 min with the efficiencies from 24,000 to 1,310,000 plates/m. In the presence of ClO4- as EOF adjustor, the separation of a mixture containing four basic proteins (lysozyme, cytochrome c, alpha-chymotrypsinogen A, and myoglobin) yielded efficiencies of 204,000-896,000 plates/m and recoveries of 88%-98%. Migration time reproducibility of these proteins was less than 0.5% relative standard deviation (RSD) from run to run and less than 3.1% RSD from day to day, showing promising application of this novel modifier in protein separation.     

Sol-Gel Preparation of Ceramic Coatings for Electrical, Laser, Space Engineering and Power

The brief review, based on long-term experience of authors on preparation of temperature-resistant electric insulating and optical light-reflecting ceramic coatings on metal surface is offered. The main components of TEOS-, H₃PO₄- and alkali silicates-derived sols and suspensions for deposition of ceramic coatings are listed. Some features of preparation of the coatings from the sols containing fillers are analysed. Two approaches to improve bending and electrical strength of flexible insulation are developed. The techniques of synthesis of modified fillers for preparing gas-proof and anticorrosive coatings are offered. The wide functional possibility and extensive list of application areas of the coatings and some materials prepared from sols with fillers, including on far prospect are given.     

Healable dual organic–inorganic crosslinked sol–gel based polymers: Crosslinking density and tetrasulfide content effect

In this article, the first generation of healable sol–gel based polymers is reported. A dual organic–inorganic crosslinked network is developed containing non‐reversible crosslinks and reversible (tetrasulfide) groups. The designed polymer architecture allows thermally induced mesoscale flow leading to damage closure followed by interfacial strength restoration due to reformation of the reversible groups. While the reversible bonds are responsible for the flow and the interface restoration, the irreversible crosslinks control the required mechanical integrity during the healing process. The temperature dependent gap closure kinetics is strongly affected by the crosslinking density and tetrasulfide content. Raman spectroscopy is used to explain the gap closure kinetics in air and dry nitrogen. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1953–1961